Fuller,FRO and FSO Bell Housings (most styles)

Main input Bore/sleeve- $105
Countershaft Bore/sleeve- $95
12 Bolt Halo update- $100

Fuller Transmission Conversion/Change Overs

710C/709H Change over to 14713.(enlarge main Aux bore 10 spd to 13 spd) - $75

710C/709H change over to 16713.

Main aux bore enlarge. - $75

Both rear counter shafts from 2.9915-3.156 races. -$135

Total - $210

Slave Valves

Change over from auto shift to manual shift - $160

Add slave valve to blank (ex. 16610 super 10) - $95

Repair warn slave valve hole - $95

710C/709H change over to small small 18913 W/12 bolt halo

Main Aux Bore (Enlarge) - $75

Butterfly Cut - $135

Splitter Tube Window - $85

Add 12 Bolt and Halo - $95

Shrink both rear counters shafts from

the MU1308 bearing to the FRO - $260

Total - $650

Fuller, FRO Transmissions Main Case: Cast iron sleeve repairs

Input and front counter shaft Bore/sleeve- $95 each
Rear counter shafts Bore/sleeve- $105 each
Rear auxiliary counter shafts Bore/sleeve- $105 each
Bore/sleeve Auxiliary Main shaft bore- $135
Bore out Auxiliary Main shaft for larger bearing- $75
Butterfly cut for thicker gears- $135
Oil Tube Window cut (Splitter Tube)- $85
Machine for oil pump- $265
Machine FRO style for oil pump- $215
Auto Shift to manual slave valve- $160
Add slave valve to blank case- $95
Resleeve bad slave valve- $95
12 Bolt drill pattern- $55
Add 12 Bolt drill pattern and Halo(to blank case)- $95
12 Bolt drill pattern and finish Halo( drill through webbing and sleeve plugged halo)- $120
Sunken Auxiliary counter shaft(shrink bore using custom sleeves)- $170 each
Mill 6 bolt PTO surface to remove rust and pitting- $60-$90 depending on pitting depth

Back Half's

Counter Shafts - $85

Output - $125

Drill and tap 1218L for 4304497 Retainer plate at Main Aux.

- $65

Change Retainer Bolt Hole Locations

Fuller Back Sections (Covers)

Bore and Sleeve Counter

Shafts ea. - $85

Bore and Sleeve Main Shaft - $125

710CAS Change over to large/small 18913 w/12 bolt halo.

Main Aux bore enlarge - $75

Butterfly Cut - $135

Splitter Tube Window - $85

Add 12 Bolt & Halo - $95

Change over auto shift valve to standard slave valve - $ 160

Total - $550

710C/709H change over to a large small 18913 w/12 bolt halo

Main Aux Bore - $75

Butterfly Cut - $135

Splitter Tube Window - $95

Add 12 Bolt Halo - $95

Total - $390

Mid Range Transmissions

FSO Style Transmissions-
Main Input Bore/sleeve- $95
Countershaft Bore/sleeve- $105

NP5600-
Input-$95
Outout- $95

NP6500 Back Halfs-
4x4 or 4x2- $110

NP5600 Bell Housings-
Input-$110

ESO667B
Input- $95
Output- $95

ESO Bell Housing-
Input- $105

Main Aux Bore (enlarge) - $75

Both rear counter shafts from 2.99 to 3.156 races - $135

Total Cost - $210

710C/709H Change over to 16713

710CAS Change over to small/small 18913 w/12 bolt and Halo

Main Aux Bore (enlarge) - $75

Butterfly Cut - $135

Splitter Tube Window-$85

Add 12 Bolt and Halo - $95

Change over Auto Shift to manual valve- $160

Shrink Rear Counter Shafts from the mu1308 to the FRO bearing - $260

Individual service line item cost - $810

Discounted price for this service - $710

Transmission Services

All transmissions not listed would be time and material (please call or mail picture).